Advantages Easy mixing and handling like a conventional cement Similar mechanical properties to resin cements Intrinsic adhesion to tooth structure Minimal film thickness Easy seating and improved fit No post-operative sensitivity Radiopaque In combination with the GC Fuji PLUS Conditioner Optimal marginal seal Continued high fluoride release Packaging GC Fuji PLUS Capsules, Box of 50 RECOMMENDED INDICATIONS 1. Cementation of metal-based inlays, onlays, crowns and bridges 2. Cementation of resin inlays, onlays, crowns and bridges 3. Cementation of all ceramic inlays 4. Cementation of high strength (zirconia based) all ceramic crowns and bridges 5. Cementation of metal, ceramic and fiber posts CONTRAINDICATIONS 1. Pulp capping. 2. Avoid use of this product in patients with known allergies to glass ionomer cement, methacrylate monomer or methacrylate polymer. 1. TOOTH PREPARATION a) Prepare tooth in usual manner. For pulp capping, use calcium hydroxide. b) Clean the prepared teeth with pumice and water. Note: Apply GC Fuji PLUS CONDITIONER for 20 seconds using a cotton pellet or sponge. c) Rinse thoroughly with water. Remove excess moisture by blotting with a cotton pellet or gently bowing with an oil-free air. DO NOT DESICCATE. Best results are obtained when prepared surfaces appear moist (glistening). 2. RESTORATION PREPARATION Make sure that the restoration is pretreated and handled according to the manufacturer’s instructions. 3. CAPSULE ACTIVATION AND MIXING a) Before activation, shake the capsule or tap its side on a hard surface to loosen the powder (Fig. 1). b) To activate the capsule, push the plunger until it is fully depressed with the main body and hold it down for 2 seconds (Fig. 2). Note: 1) Ensure the plunger is fully pressed to avoid the incorrect mixing ratio of powder and liquid. 2) The capsule should be activated just before mixing and used immediately. c) Immediately set it into a mixer (or an amalgamator) and mix for 10 seconds (+/- 4,000 RPM) (Fig. 3). Note: When using a rotational mixing device, it is recommended not to use the centrifuge option. 4. DISPENSING a) Immediately remove the mixed capsule from the mixer and load it into the GC CAPSULE APPLIER. b) Make two clicks to prime the capsule (Fig. 4). To adjust the direction of the nozzle, hold the applier with the capsule towards you and turn the capsule body. c) Extrude directly into the restoration (Fig. 5). d) To remove the used capsule, push the applier release button. Twist the capsule and pull upwards. 5. CEMENTATION a) Coat the internal surface of the restoration with sufficient cement and seat immediately. The working time is 2 minutes from start of mixing at 23°C (73°F). Higher temperatures will shorten working time. Note: For more complex procedures requiring longer working time, it is recommended to refrigerate the capsules in the original aluminium foil. b) Maintain moderate pressure. c) Start removing excess cement when the excess cement feels rubbery (Fig. 6). d) Finishing can be started 4 minutes 15 seconds after seating the restoration
GC Fuji Plus Resin-modified Glass Ionomer Cement Capsules, Box of 50
Brand Name
: GC Asia
SKU
: PMH202305921-202200023-N/A
Product Code
: PMH202305921
-+
