Kemdent’s Simplex Rapid is a self-curing and cold cured polymethylmethacrylate acrylic material with multiple applications. It is ideal for repairs, indirect relines and additions to removable prosthetic appliances.

Kemdent’s Simplex Rapid is a self-curing and cold cured polymethylmethacrylate acrylic material with multiple applications. It is ideal for repairs, indirect relines and additions to removable prosthetic appliances.

Kemdent’s Simplex Rapid is a self-curing and cold cured polymethylmethacrylate acrylic material with multiple applications. It is ideal for repairs, indirect relines and additions to removable prosthetic appliances.

Refill pack includes 20 Maxicap™ Capsules in the Translucent shade. Benefits: -Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges and 3-unit inlay/onlay bridges. Selective etching is required to increase surface area for bonding.

Refill pack includes 20 Maxicap™ Capsules in the Translucent shade. Benefits: -Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges and 3-unit inlay/onlay bridges. Selective etching is required to increase surface area for bonding.

Refill pack includes 20 Maxicap™ Capsules in the Translucent shade. Benefits: -Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges and 3-unit inlay/onlay bridges. Selective etching is required to increase surface area for bonding.

Refill pack includes 20 Maxicap™ Capsules in the Translucent shade. Benefits: -Time-saving - no etching**, priming or bonding. Virtually no post-operative sensitivity. Easy removal of excess. Optimal consistency. Strong and moisture-tolerant.**Except for 2- or 3-unit Maryland bridges and 3-unit inlay/onlay bridges. Selective etching is required to increase surface area for bonding.

Suggested Applications For temporary restorations, including:**Multiple-unit bridges. Full and partial crowns. Inlays and onlays.

BRAND : 3M RelyX Unicem Aplicap COLOR : Clear ITEME : longation Tips ITEM TYPE : Cement QUANTITY : 10/Bag

Alganol is a modified accelerated setting zinc oxide eugenol cement which conforms to ISO 3107. Mix Alganol powder and Alganol liquid together to form an economical temporary restoration, base or cementation of crowns, bridges. onlays, inlays, orthodontic bands and brackets. The mixture is also used for cavity linings under amalgam and silicate restorations, for pulp capping (to protect the pulp from thermal change and acid irritation of cements) and as a temporary seal for medicament dressings. Do not use as a base for composite restorations. Working time after mixing: 2 minute – 8 minutes. Mixing time:1 min 30 seconds maximum Setting Time at 37°C 4 minutes- 10 minutes: Warm conditions decrease and cold conditions increase working and setting times.. Store in a cool, dry, place. Replace cap after use.

Instructions for Use 1. Preparing the Flask Invest the waxed up case in the usual manner. Place flask in a pan of clean boiling water and allow to set for 5 minutes while water continues boiling. Separate flask and remove wax by flushing with a solution of detergent in boiling water. Use clean boiling water for final flush. Be sure case is free of all wax, grease and detergent before continuing. 2. Applying Tin Foil Substitute With mold at about 120°F (49°C), apply Liquid Foil generously to all areas that will contact the resin. Remove excess with a clean, dry brush and let thoroughly dry (3-4 minutes) before packing cases. 3. Mixing Pour 11mL High Impact-45 liquid into porcelain or glass mixing jar. Add 30cc (20g) High Impact-45 powder. Stir with a stainless steel spatula until evenly mixed. Place cap tightly on jar. Allow the mix to gel for about five minutes, or until it has reached a dough-like consistency and is not sticky to the touch of a spatula. From this point, material is workable for 20 minutes. 4. Packing Cool flask to 68°-77°F (20°-25°C). Trial pack using damp cellophane or polyethylene sheets. Separate flask and remove plastic sheet. If needed, use additional material and repeat process. In trial packing, leave excess material on flanges of flask until ready for final closure. Then remove excess to within 4mm of periphery. Close flask completely. 5. Curing Place flask in spring compress. Let set for 30 minutes on bench. Immerse flask in hot water, bringing temperature to about 165°F (74°C). Hold flask at that temperature for 1 hour. Then bring water to boil and hold for 30 minutes. Cool on bench for 30 minutes before deflasking. 6. Finishing Finish case in usual manner using fine abrasives and polishing wheels. If any trace of stone or plaster has adhered to case, soak overnight in a 5% solution of sodium citrate before polishing.

ADHESIVE : Adhesive BRAND : 3M RelyX COMPOSITION/INGREDIENTS : Try-In Paste CURE TYPE : Light Cure ITEM : Cement PACKAGING TYPE : Syringe QUANTITY : 2gm/Each SHADE : Translucent WEIGHT : 2 Gm