Ivoclar SR Vivodent PE Shade 2B For Upper and Lower Anterior teeth (set of 6)

Ivoclar SR Vivodent PE Shade 2C For Upper and Lower Anterior teeth (set of 6)

Ivoclar SR Vivodent PE Shade 1E For Upper and Lower Anterior teeth (set of 6)

Ivoclar SR Vivodent PE Shade 1D For Upper and Lower Anterior teeth (set of 6)

Ivoclar SR Vivodent PE Shade 1C For Upper and Lower Anterior teeth (set of 6)

Ivoclar SR Vivodent PE Shade 1A For Anterior teeth (set of 6) The SR Vivodent PE anterior teeth demonstrate a high degree of hardness, density, solvent resistance and shade stability. They are particularly suitable for complete denture prosthetics. The SR Vivodent PE anterior teeth are also suitable for the fabrication of implant-supported complete dentures that have to fulfil exceptionally high esthetic demands. SR Vivodent PE teeth feature a subtle pearly shimmer. Advantages Highly esthetic Particularly suitable for complete dentures Intensely shaded tooth necks Delivery forms 20 SR Vivodent PE shades 24 upper, 8 lower moulds

Dental Stone (Type III) 5 Kg - Green Colour

White Plaster Type II Technical Data: Mixing proportions: 94ml:100g Setting time: 3' / 5' Setting expansion: 0.12% Compressive strength (1h): 25kg/cm2

White Plaster Type II Technical Data: Mixing proportions: 94ml:100g Setting time: 3' / 5' Setting expansion: 0.12% Compressive strength (1h): 25kg/cm2

• Water/powder ratio: 25 ml/100 g • Imbibition time: 20’’ • Manual mixing time: 60’’ • Mechanical mixing time: 30’’ • Pouring time: 3’ • Setting time: 7’ • Time for separation after setting*: 30’ • Setting expansion (after 2 hours): 0,08% • Compressive strength (after 24 hours): 70 MPa – 10.144 Psi – 713 Kg/cm2 • Rockwell hardness (after 24 hours): 75 HRl Measurements at 23°C with deionized water. * Depending on the impression material used, the times indicated may vary.

• Water/powder ratio: 25 ml/100 g • Imbibition time: 20’’ • Manual mixing time: 60’’ • Mechanical mixing time: 30’’ • Pouring time: 3’ • Setting time: 7’ • Time for separation after setting*: 30’ • Setting expansion (after 2 hours): 0,08% • Compressive strength (after 24 hours): 70 MPa – 10.144 Psi – 713 Kg/cm2 • Rockwell hardness (after 24 hours): 75 HRl Measurements at 23°C with deionized water. * Depending on the impression material used, the times indicated may vary.

Aluminum oxide powder for sandblasting - Aluminium Oxide powder 50 µ Airsonic #15301